Every report is drawn from an actual SAS Powertech field engagement — live load measurements, calibrated instrumentation data, and compliance findings exactly as conducted.
Browse Sample ReportsEach report reflects actual on-site instrumentation, findings, and compliance assessments. New reports are added as completed engagements are cleared for release.
Full plant-level assessment covering load flow study, cable size validation, harmonic analysis, earth pit testing by fall-of-potential method, IR thermography, and CEA Regulations 2023 statutory compliance verification.
Incident energy calculations per IEEE 1584, flash protection boundary determination, PPE category assignments, and equipment labelling recommendations for industrial switchgear and distribution panels.
Protective relay setting analysis for selectivity, time-current characteristic verification, fault level calculations, and recommended relay settings for proper upstream-downstream discrimination.
Power quality measurements at PCC level covering THD analysis, harmonic spectrum profiling, resonance identification, and filter recommendations as per IEEE 519 limits.
Site-specific lightning risk assessment per IS 2309, protection zone calculations, earth termination network design, SPD recommendations, and maintenance schedule for industrial facilities.
All audits conducted and documented per the current statutory framework issued by the Central Electricity Authority.
Recording-type power analyzers and earthing testers — every data point is measured, not estimated.
Reports prepared by qualified electrical engineers registered with recognised statutory bodies.
Structured reports with prioritised findings, compliance gaps, and clear remediation recommendations.
Our team conducts on-site audits across industrial, pharmaceutical, and commercial facilities — from initial compliance checks to detailed arc flash and power quality studies.